If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ilford HP5 Developing
Hi all,
I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? Will these have or be affected by a tank used for E6 and vise/versa? Any suggestions on 'other' chems are appreciated. Thanks all Martin |
#2
|
|||
|
|||
Martin Riddle wrote:
Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#3
|
|||
|
|||
Martin Riddle wrote:
Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#4
|
|||
|
|||
Martin Riddle wrote:
Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#5
|
|||
|
|||
The Wogster wrote: Martin Riddle wrote: Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? If you don't want to wash your film for 30 minutes you should use wash aid. Cuts the wash time down to 5 minutes. No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#6
|
|||
|
|||
The Wogster wrote: Martin Riddle wrote: Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? If you don't want to wash your film for 30 minutes you should use wash aid. Cuts the wash time down to 5 minutes. No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#7
|
|||
|
|||
The Wogster wrote: Martin Riddle wrote: Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? If you don't want to wash your film for 30 minutes you should use wash aid. Cuts the wash time down to 5 minutes. No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#8
|
|||
|
|||
Quote:
I always process HP5 in Ilford ID-11 (or Kodak D76 - same thing). Dilute 1+3 20'C 22 minutes Don't bother with a stop bath - just use 2 water rinses. Any Fixer will be OK - I use Ilford Hypam Wash in 5 changes of water - agitating well between changes. Tanks can be used for multi purposes - just make sure you wash WELL between uses so no contamination occurs. Best wishes Ray |
#9
|
|||
|
|||
Thanks all.
"Tom Phillips" wrote in message ... The Wogster wrote: Martin Riddle wrote: Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? If you don't want to wash your film for 30 minutes you should use wash aid. Cuts the wash time down to 5 minutes. No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
#10
|
|||
|
|||
Thanks all.
"Tom Phillips" wrote in message ... The Wogster wrote: Martin Riddle wrote: Hi all, I've done E-6 processing and have a roll of this Ilford B&W HP5 film. I never did B&W before I figure its straight forward. What Chemicals and whos should I use. I am eyeing... (spiral Tank) Ilford DD-X Ilford IlfoStop Ilford Ilfotol Do I need the wash aid? If you don't want to wash your film for 30 minutes you should use wash aid. Cuts the wash time down to 5 minutes. No, but you will need some fixer..... Ilford Rapid Fixer or Hypam are both good, skip the powdered Ilfofix II..... Will these have or be affected by a tank used for E6 and vise/versa? Make sure you clean the tank well, and it should be OK, I used to do B&W and C41 all the time, using the same tank. Just make sure you wash using dish detergent and rinse thoroughly, then make sure everything is dry..... W |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Don't bother with Ilford paper & Canon i9950 | BenOne© | Digital Photography | 13 | December 1st 04 05:33 AM |
which online shops for ilford bw films? | Gianni Rondinini | Film & Labs | 6 | November 6th 04 07:30 AM |
Press Release from Ilford | Largformat | Large Format Photography Equipment | 10 | August 27th 04 05:54 AM |
ilford pan 100 = ilford HP5 plus? | sreenath | In The Darkroom | 8 | July 5th 04 11:15 AM |