If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Durst 1200 - Colidap 1205
Hi,
My Durst 1200 laborator 4X5 enlarger has a model name (I guess) " colidap 1205". Does any one know what difference or in/significance it makes? I searched the web but found not much. Thank you for the help. |
#2
|
|||
|
|||
Durst 1200 - Colidap 1205
"Alparslan" wrote in message ...
Hi, My Durst 1200 laborator 4X5 enlarger has a model name (I guess) " colidap 1205". Does any one know what difference or in/significance it makes? I searched the web but found not much. Thank you for the help. Try the Jobo website or call them. They are very helpful. Also, there is www.jensen-optical.com Good luck |
#3
|
|||
|
|||
Durst 1200 - Colidap 1205
"Alparslan" wrote in message ...
Hi, My Durst 1200 laborator 4X5 enlarger has a model name (I guess) " colidap 1205". Does any one know what difference or in/significance it makes? I searched the web but found not much. Thank you for the help. Welcome to the wonderful wacky world of Durst! My L1000 (also a 4x5 enlarger, with a CLS450 dichroic head) takes Taunobox mixing boxes and Camneg negative holders. Good luck finding anything out about *those*! The enlarger came with 35mm, 6x6 and 4x5 accessories, and I tried for a very long time to ascertain the availa- bility (or even existence, for that matter) of Taunobox 67 and Camneg 67 so I could print my Pentax 67 negatives properly. I ended up buying a 6x7 enlarger - one of the Saunders/LPL jobs. Go figure. Laura Halliday VE7LDH "Que les nuages soient notre Grid: CN89mg pied a terre..." ICBM: 49 16.05 N 122 56.92 W - Hospital/Shafte |
#4
|
|||
|
|||
Durst 1200 - Colidap 1205
The enlarger came with 35mm, 6x6 and 4x5 accessories,
and I tried for a very long time to ascertain the availa- bility (or even existence, for that matter) of Taunobox 67 and Camneg 67 so I could print my Pentax 67 negatives properly. I ended up buying a 6x7 enlarger - one of the Saunders/LPL jobs. Go figure. If I remember correctly you got a reasonable offer for the right mixing chamber (Taunobox 69) but let it pass by. Go figure Stefan |
Thread Tools | |
Display Modes | |
|
|