If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTB Beseler 67s 6x6 Negative carrier
Hi,
I am just getting a darkroom put together for first time and purchased a Beseler 67s enlarger and am hoping to find a used 6x6 carrier for it. It came with a 6x7.What luck??? I know I can find new ones but on retirement fixed income they are a bit expensive.I have thought about blocking off the larger side of the 6x7 with tape or some other material but don't know if that would work? Thanks in advance Jim |
#2
|
|||
|
|||
purchased a Beseler 67s enlarger and am hoping to find a used 6x6
carrier for it. It came with a 6x7.What luck??? I know I can find new ones but on retirement fixed income they are a bit expensive.I have thought about blocking off the larger side of the 6x7 with tape or You can make one using some card stock.. I made one and it works ok some what primitave but it does work. you need to use about 8 pieces of card stock glued together. Do not glue the top layer as you will slide the negative under this piece. I just used a 35mm carrier to draw the layout onto the card stock and cut it out to the size of 2 1/4. I too am looking for a used 2 1/4 for 6x6 carrier but have never found one. Don |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do I calibrate my photographic process | Alan Smithee | In The Darkroom | 66 | August 31st 04 04:45 PM |
What densities at which zones? | ~BitPump | Large Format Photography Equipment | 24 | August 13th 04 04:15 AM |
Kodak on Variable Film Development: NO! | Michael Scarpitti | In The Darkroom | 276 | August 12th 04 10:42 PM |
Needed: universal glass negative carrier (anti-Newton) for beseler 23C | Phil Glaser | Darkroom Equipment For Sale | 0 | June 14th 04 07:47 PM |
Heat absorbing glass or one-size-fits all glass carrier for 23CII negative popping problem | Phil Glaser | In The Darkroom | 2 | June 1st 04 01:47 PM |