Can I use an old fashion flash unit with a digital camera?

I have just bought a Canon PowerShot G7, and this camera has a hot
shoe. Does anybody know wheteher I can use an old fashioned flash unit
with this hot shoe, or whether it could damage the camera? When I say
"old fashioned flash-unit", I mean a flash unit made for an analoge
camera (we are talking last century).

Do you know? If you do, I would be grateful if you tok the time to let
me know.


Magne Braaten

wrote:
I have just bought a Canon PowerShot G7, and this camera has a hot
shoe. Does anybody know wheteher I can use an old fashioned flash unit
with this hot shoe, or whether it could damage the camera? When I say
"old fashioned flash-unit", I mean a flash unit made for an analoge
camera (we are talking last century).

Do you know? If you do, I would be grateful if you tok the time to let
me know.


Magne Braaten
http://www.botzilla.com/photo/strobeVolts.html
Have a look at this list. If your flashgun has a trigger voltage higher than
24 volts, don't use it with your G7.

Dennis.

wrote:
: I have just bought a Canon PowerShot G7, and this camera has a hot
: shoe. Does anybody know wheteher I can use an old fashioned flash unit
: with this hot shoe, or whether it could damage the camera? When I say
: "old fashioned flash-unit", I mean a flash unit made for an analoge
: camera (we are talking last century).

: Do you know? If you do, I would be grateful if you tok the time to let
: me know.

Without knowing the specifics of the flash unit none of us can be
absolutely certain, but in general yest the falsh will probably work, to a
point. A flash unit with a hot shoe connection that fits the standard will
fit a standard shoe. And most cameras with a hot shoe connection will be
able to at least connect with the standard shoe. But some manufacturers
tend to make camera specific modifications to their shoes that may or may
not be standard to other cameras. For example a pentax flash has
additional contacts that won't connect with anything on a canon camera hot
shoe. So not all functions will work correctly. Also some older flashes,
even for the correct brand, may not properly connect or even have all the
functions of newr cameras. So a flash may not be able to take advantage of
TTL functions, for example. The basic standard simply uses the large
central contact connecting to the outer shoe frame to cause the flash to
flash. But other contacts may have other functions such as sensing if the
flash is fully charged, or for adgusting the flash output in coordination
with the focus distance. These functions may be unavailable if the camera
connections are not compatable.

Not knowing the specifics of the two devices (flash and camera) it will be
difficult to give a definative answer. But in general I would suspect that
most any flash and camera will have at least some basic level of
functionality. Its possible that if the flash is modified (by removing all
but the shoe frame and center contacts) it could give you the default
basic function with no further problems or advantages.

One caution. I have heard that there are a few models of flash unit that
present high voltages to unexpected contacts that may damage some
inexpensive cameras. So You may want to check with the web site of the
manufacturer and the flash unit to see if there are any compatability
lists that could give you an idea if this is a problem with your
particular units.

Randy

==========
Randy Berbaum
Champaign, IL

There are a couple of issues here...

1. If the flash is an older unit, the voltage on its terminals might
damage the camera.

2. The digital camera may have a "red eye" feature. This can trip off
some slave units.

If you are comfortable with issue #1, give it a try, and see what the
results are. Myself, I bought a small flash unit (Sunpak, about $30)
for my Olympus C-5000. I can run it from the hot shoe, or as a slave
unit. I ended up giving all my old film equipment and a flash to my
grandson...

"professorpaul" wrote in message
ups.com...
There are a couple of issues here...

1. If the flash is an older unit, the voltage on its terminals might
damage the camera.

2. The digital camera may have a "red eye" feature. This can trip off
some slave units.

If you are comfortable with issue #1, give it a try, and see what the
results are. Myself, I bought a small flash unit (Sunpak, about $30)
for my Olympus C-5000. I can run it from the hot shoe, or as a slave
unit. I ended up giving all my old film equipment and a flash to my
grandson...


Wein Products has two items which apply. The HSHS will protect the camera
from high voltages. There is also a digital HS which both protects from too
high voltage and senses the second flash for use with a slave unit. Many
(most?) digital cameras' flash units trigger an exposure setting flash ahead
of the main flash. This is not the same as a red eye reducing flash and is
so close to the main flash that you generally will not be aware of it.
However, a slave flash without the digital hot shoe will trigger with the
pre-flash and thus will not illuminate the picture. If you are using a slave
flash, take your picture in a mirror with both the camera's flash and the
slave flash. You may be surprised, as I was, that the slave flash, while it
fired, doesn't show up as flashing in the picture.

No, I have no connection with Wein; don't even know for certain that these
products are still available, but if they are, they are worth their cost.

Bill Yowell

"professorpaul" wrote in message
ups.com...
There are a couple of issues here...

1. If the flash is an older unit, the voltage on its terminals might
damage the camera.

2. The digital camera may have a "red eye" feature. This can trip off
some slave units.

If you are comfortable with issue #1, give it a try, and see what the
results are. Myself, I bought a small flash unit (Sunpak, about $30)
for my Olympus C-5000. I can run it from the hot shoe, or as a slave
unit. I ended up giving all my old film equipment and a flash to my
grandson...


You may have problems if you are using digital SLRs.

For example, with the Canon digital SLRs you need a Canon EX flashgun.
The older EZ flashguns will not work because they sense the light reflected
off the film in their film bodies. This reflected light this isn't available
in their digital bodies.

Regards, Ian.

writes:
I have just bought a Canon PowerShot G7, and this camera has a hot
shoe. Does anybody know wheteher I can use an old fashioned flash
unit with this hot shoe, or whether it could damage the camera? When
I say "old fashioned flash-unit", I mean a flash unit made for an
analoge camera (we are talking last century).

Yes, but with some caveats. Here is a page about buying a flash
for a Canon camera with E-TTL, such as the G7:
http://hannemyr.com/photo/flash.html

Btw, I have a Powershot G5 and use it regularly with an older,
non-dedicated, flash. It works great and for main flash it
actually gives more precsie exposure than Canon's 580EX.
--
- gisle hannemyr [ gisle{at}hannemyr.no - http://hannemyr.com/photo/ ]
------------------------------------------------------------------------
Sigma SD10, Kodak DCS460, Canon Powershot G5, Olympus 2020Z
------------------------------------------------------------------------