If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Tech Support?
On 10/1/2013 10:55 PM, nospam wrote:
In article 201310011916001393-savageduck1@REMOVESPAMmecom, Savageduck wrote: On 2013-10-01 19:02:48 -0700, nospam said: In article 2013100118384311967-savageduck1@REMOVESPAMmecom, Savageduck wrote: Indeed, I considred using a iPad to transfer files from my CF cards toa portable hard drive. The Apple people told me it couldn't be done. it's not intended to transfer files from a camera to a hard drive. If you use the Apple "Camera Kit" it does. not in the way you think. What way do I think? ...or should I ask, what way do you think I think? read what i said: it's not intended to transfer files from a camera to a hard drive. you then said with the cck, it can do that. that tells me you are thinking it can operate as a typical hard drive plugged into a laptop, both read and write. it cannot. the cck is designed for the most common use case, copying photos from a camera to the ipad. that's why it's called a camera connection kit and not a hard drive interface kit. I use the Apple "Camera Kit" to transfer image files (JPEG only as there is little point to load RAW files onto the iPad) from SDHC cards used in my G11 and my D300S. For The times I shoot RAW+JPEG on my D300s without an SDHC in the second slot, or for images captured on my Fujifilm E900 which uses the awful, and mostly incompatible xD card, I use the USB part of the "Camera kit" to connect the camera (D300S or E900 via USB cable. My iPad has no problem recognizing the files on either camera. One note, you cannot use normal card readers which require a USB power source, the iPad does not do that. Now, what in way was it you think I was thinking? what you describe is the normal task of copying photos from a card or camera to the ipad and is fully supported. i never said otherwise. as for hard drives, any usb hard drive would do the same thing (assuming it's self-powered, obviously) and only if the photos were in the same folder hierarchy as a camera's memory card (dcim folder). the ipad sees the drive as a memory card and as with a card, it's read-only. that is not an issue for 99% of use cases. people want to copy photos off the cards so that they can reuse them to take more photos, not write images back to them. it's *extremely* rare that someone would want to copy photos to a card, especially from a device that has a much better method of displaying them and the connectivity to upload them to pretty much anywhere. All of which proves, that the iPad port, does not function as a USB port. Which is the function i need. -- PeterN |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tech support | Jean Nohain | Digital Photography | 7 | November 17th 04 11:38 AM |