If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
METZ 45 CL-4, HELP!!!!
I need your help
What do I need to connect METZ 45 CL-4 to my fuji s602z? My dc haven't got connection for PC syncro cable . I supossed to buy some kind of adapter and mount it in my hot-shoe external flash( estandard - central point). How much does it could cost? Is possible that connection? Is "better" Metz 32MZ-3? ( don't think so, but I don't know much about flashes) Anyway my dc doesn't support TTL, just manal and auto Thanks for your help |
#2
|
|||
|
|||
METZ 45 CL-4, HELP!!!!
I supossed to buy some kind of adapter and
mount it in my hot-shoe external flash( estandard - central point). This camera is equipped with an accessory shoe with CENTRE CONTACT for the connection of an external flash unit providing auto flash mode |
#3
|
|||
|
|||
METZ 45 CL-4, HELP!!!!
You might be better off posing the question directly to Metz because they
frequently come out with new adapters. I'll give you an example (for Nikon): If you go by the Magic Lantern Metz guide, you'd think that for newer Nikons you'd use either the SCA 3000C + SCA 3401 or the SCA 300A + SCA 346...BUT, the latest for AF Nikons is either the SCA 3000C + SCA 3402 or the SCA 300A + SCA 346/2. Good luck...in Metz-land it is impossible to tell the players without a program... George "PhAnTOmaS" wrote in message ... I need your help What do I need to connect METZ 45 CL-4 to my fuji s602z? My dc haven't got connection for PC syncro cable . I supossed to buy some kind of adapter and mount it in my hot-shoe external flash( estandard - central point). How much does it could cost? Is possible that connection? Is "better" Metz 32MZ-3? ( don't think so, but I don't know much about flashes) Anyway my dc doesn't support TTL, just manal and auto Thanks for your help |
#4
|
|||
|
|||
METZ 45 CL-4, HELP!!!!
If that is all you want, how about this suggestion:
The Metz 45 CL-4 comes with a sync cable that attaches to a pc sync terminal on a camera so your problem must be that your camera doesn't have one or you're concerned about the sync voltage. To solve either (or both) problems just pick up the Wein Safe Sync, slip it in your hot shoe, and plug the cable that came with your flash into that. For informational purposes (I think you're outside the U.S.), you might want to see it at: http://www.bhphotovideo.com/bnh/cont...=245292&is=REG "PhAnTOmaS" wrote in message ... I supossed to buy some kind of adapter and mount it in my hot-shoe external flash( estandard - central point). This camera is equipped with an accessory shoe with CENTRE CONTACT for the connection of an external flash unit providing auto flash mode |
Thread Tools | |
Display Modes | |
|
|