METZ 45 CL-4, HELP!!!!

I need your help

What do I need to connect METZ 45 CL-4 to my fuji s602z? My dc haven't got
connection for PC syncro cable . I supossed to buy some kind of adapter and
mount it in my hot-shoe external flash( estandard - central point).

How much does it could cost?
Is possible that connection?
Is "better" Metz 32MZ-3? ( don't think so, but I don't know much about
flashes)

Anyway my dc doesn't support TTL, just manal and auto

Thanks for your help

I supossed to buy some kind of adapter and
mount it in my hot-shoe external flash( estandard - central point).

This camera is equipped with an accessory shoe with CENTRE CONTACT for the
connection of an external flash unit providing auto flash mode

You might be better off posing the question directly to Metz because they
frequently come out with new adapters. I'll give you an example (for
Nikon): If you go by the Magic Lantern Metz guide, you'd think that for
newer Nikons you'd use either the SCA 3000C + SCA 3401 or the SCA 300A + SCA
346...BUT, the latest for AF Nikons is either the SCA 3000C + SCA 3402 or
the SCA 300A + SCA 346/2.

Good luck...in Metz-land it is impossible to tell the players without a
program...

George

"PhAnTOmaS" wrote in message
...
I need your help

What do I need to connect METZ 45 CL-4 to my fuji s602z? My dc haven't got
connection for PC syncro cable . I supossed to buy some kind of adapter
and
mount it in my hot-shoe external flash( estandard - central point).

How much does it could cost?
Is possible that connection?
Is "better" Metz 32MZ-3? ( don't think so, but I don't know much about
flashes)

Anyway my dc doesn't support TTL, just manal and auto

Thanks for your help

If that is all you want, how about this suggestion:
The Metz 45 CL-4 comes with a sync cable that attaches to a pc sync terminal
on a camera so your problem must be that your camera doesn't have one or
you're concerned about the sync voltage. To solve either (or both) problems
just pick up the Wein Safe Sync, slip it in your hot shoe, and plug the
cable that came with your flash into that.

For informational purposes (I think you're outside the U.S.), you might want
to see it at:
http://www.bhphotovideo.com/bnh/cont...=245292&is=REG

"PhAnTOmaS" wrote in message
...
I supossed to buy some kind of adapter and
mount it in my hot-shoe external flash( estandard - central point).

This camera is equipped with an accessory shoe with CENTRE CONTACT for the
connection of an external flash unit providing auto flash mode