If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
On1 fixed one big problem with Photo Raw
Their new version (2018.5) for Windows finally fixed an issue I
complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. |
#2
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On Jun 28, 2018, Bill W wrote
(in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. -- Regards, Savageduck |
#3
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On Thu, 28 Jun 2018 20:43:15 -0700, Savageduck
wrote: On Jun 28, 2018, Bill W wrote (in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. Oops - you're right, it's DXO. |
#4
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On 6/28/2018 10:57 PM, Bill W wrote:
Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. According to one of my friends, the $49 bucks, did not get him an improved product. I will wait and see, i there are any substantial improvements -- PeterN |
#5
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On 6/29/2018 12:58 AM, Bill W wrote:
On Thu, 28 Jun 2018 20:43:15 -0700, Savageduck wrote: On Jun 28, 2018, Bill W wrote (in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. Oops - you're right, it's DXO. I think that most understood you were talking about DXO.m The only reasons I used it before were for its denoise and lens distortion correction. Now I find that the new Topaz Denoise works extremely well, although there is a slight learning curve, and the lens distortion correction in PS sees to work pretty well. YMMV -- PeterN |
#6
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On Jun 29, 2018, PeterN wrote
(in article ): On 6/28/2018 10:57 PM, Bill W wrote: Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. According to one of my friends, the $49 bucks, did not get him an improved product. I will wait and see, i there are any substantial improvements It is the same old NIK collection Google bought so they could get their hands on Snapseed, and then abandoned until they sold it to DxO. I will say that DxO fixed a few of the issues Google left unfixed for the Mac edition, and now it works as it should on my Mac, but it is not an earth shattering revolutionary product. It is all the same stuff. It is just nice to have some of the tools I had bought from NIK at high prices, and had become familiar with, working properly again. -- Regards, Savageduck |
#7
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On Jun 29, 2018, PeterN wrote
(in article ): On 6/29/2018 12:58 AM, Bill W wrote: On Thu, 28 Jun 2018 20:43:15 -0700, Savageduck wrote: On Jun 28, 2018, Bill W wrote (in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. Oops - you're right, it's DXO. I think that most understood you were talking about DXO.m The only reasons I used it before were for its denoise and lens distortion correction. Now I find that the new Topaz Denoise works extremely well, although there is a slight learning curve, and the lens distortion correction in PS sees to work pretty well. YMMV For NR I had used NIK Define, and then Macphun’s (now Skylum) Noisless CK which is now integrated into Luminar. It is a NR app which can apply a very adjustable NR either to the entire image, or selectively in a way I find superior to the way it is done with NIK Define. I am yet to be sold on Topaz stuff. -- Regards, Savageduck |
#8
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On 6/30/2018 12:21 AM, Savageduck wrote:
On Jun 29, 2018, PeterN wrote (in article ): On 6/29/2018 12:58 AM, Bill W wrote: On Thu, 28 Jun 2018 20:43:15 -0700, Savageduck wrote: On Jun 28, 2018, Bill W wrote (in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. Oops - you're right, it's DXO. I think that most understood you were talking about DXO.m The only reasons I used it before were for its denoise and lens distortion correction. Now I find that the new Topaz Denoise works extremely well, although there is a slight learning curve, and the lens distortion correction in PS sees to work pretty well. YMMV For NR I had used NIK Define, and then Macphun’s (now Skylum) Noisless CK which is now integrated into Luminar. It is a NR app which can apply a very adjustable NR either to the entire image, or selectively in a way I find superior to the way it is done with NIK Define. I am yet to be sold on Topaz stuff. Despite Skylum's claims, there are functions that have not yet been implemented in the PC version. I don't see the need to go into details. Having said that, I purchased Aurora, and found that it helped to produce a reasonable HDR image, but I had issues going back an forth from from Aurora to LR. I contacted Skylum support, and they were aware of the issue. Watchagonnado. -- PeterN |
#9
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On Jun 30, 2018, PeterN wrote
(in article ): On 6/30/2018 12:21 AM, Savageduck wrote: On Jun 29, 2018, PeterN wrote (in article ): On 6/29/2018 12:58 AM, Bill W wrote: On Thu, 28 Jun 2018 20:43:15 -0700, Savageduck wrote: On Jun 28, 2018, Bill W wrote (in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. Oops - you're right, it's DXO. I think that most understood you were talking about DXO.m The only reasons I used it before were for its denoise and lens distortion correction. Now I find that the new Topaz Denoise works extremely well, although there is a slight learning curve, and the lens distortion correction in PS sees to work pretty well. YMMV For NR I had used NIK Define, and then Macphun’s (now Skylum) Noisless CK which is now integrated into Luminar. It is a NR app which can apply a very adjustable NR either to the entire image, or selectively in a way I find superior to the way it is done with NIK Define. I am yet to be sold on Topaz stuff. Despite Skylum's claims, there are functions that have not yet been implemented in the PC version. I don't see the need to go into details. That’s OK, I was just pointing out that the NR within Luminar (the macOS version anyway) was particularly good, even when compared with NIK Define. Having said that, I purchased Aurora, and found that it helped to produce a reasonable HDR image, but I had issues going back an forth from from Aurora to LR. I contacted Skylum support, and they were aware of the issue. I take it you opened Aurora from LR via the Plug-ins Extras menu, rather than as a standalone? If so are you having issues saving the finished Aurora HDR/or tone mapped single back to LR? Watchagonnado. Wax philosophical. -- Regards, Savageduck |
#10
|
|||
|
|||
On1 fixed one big problem with Photo Raw
On Sat, 30 Jun 2018 00:09:45 -0400, PeterN
wrote: On 6/29/2018 12:58 AM, Bill W wrote: On Thu, 28 Jun 2018 20:43:15 -0700, Savageduck wrote: On Jun 28, 2018, Bill W wrote (in ): Their new version (2018.5) for Windows finally fixed an issue I complained to them about at least a year ago. When in develop mode, and arrow keying through the filmstrip, it changes to the next photo pretty much instantly now. The delay of at least a few seconds (with raw files) used to drive me nuts. I'm assuming that they also fixed a related crash issue, but I haven't checked that yet. That wasn’t an issue I had noticed with the Mac edition. 2018.5 is also a free upgrade if you own 2018. Some of their promotional emails seemed to imply that you had to pay for an upgrade. They also have a promotional price for their latest version of NIK. I believe it's $49. They? These days NIK is owned and distributed/sold by DxO. I seriously doubt that On1 has a NIK Collection that they are selling. Oops - you're right, it's DXO. I think that most understood you were talking about DXO. Yeah, everyone but me... m The only reasons I used it before were for its denoise and lens distortion correction. Now I find that the new Topaz Denoise works extremely well, although there is a slight learning curve, and the lens distortion correction in PS sees to work pretty well. YMMV |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
I fixed my Minolta 7000 (aperture magnet problem) | [email protected] | 35mm Photo Equipment | 0 | December 17th 16 09:02 PM |
Slow PC issue easily fixed, once you understand the problem | PeterN[_6_] | Digital Photography | 21 | January 12th 16 03:27 AM |
Canon 28-105 USM / Autofocus problem - can it be fixed? | Jakob D | 35mm Photo Equipment | 1 | December 31st 04 06:14 PM |
Canon 28-105 USM / Autofocus problem - can it be fixed? | Jakob D | 35mm Photo Equipment | 0 | December 31st 04 09:10 AM |
Printer question: multipurpose vs. dedicated photo, fixed head vs.on-cartridge | not really me | Digital Photography | 0 | July 19th 04 03:28 AM |