fourier plug-in for gimp
 

having troubling with make and make install of the fourier transform
plug-in for gimp

http://chidge.net/?m=stuff&o=howtos&p=fft

supposed to do forward and reverse

the make error I get is
make: Nothing to be done for `all'.

if I (make install) after the make error, there is no error and it
creates a binary, but the filers don't show up under filters/generic
like the website above says

the binary is call fourier, if I try to run it I get the error
bash: ./fourier: cannot execute binary file: Exec format error

there is something other things called --install-bin and gimptool-2.0,
but if I try to execute them, there are errors

do I have to move the binary somewhere?

I think I have all the libraries, there are no errors that libraries are
needed

I am using this version of Ubuntu Linux
Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS
Release: 14.04
Codename: trusty

and GIMP 2.8.10


I'll be googling around in the mean time...

--
Dale

fourier plug-in for gimp
 

On 10/22/2014 03:44 PM, Dale wrote:
ies, there are no errors that libraries are
needed

I am using this version of Ubuntu Linux
Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS
Release: 14.04
Codename: trusty

and GIMP 2.8.10


I'll be googling around in the mean time...




First I'd try compiling as root


viz


sudo make


(you will be prompted for your password)


If you still have problems you will be far better off asking on

alt.os.linux.ubuntu or the Ubuntu forum

fourier plug-in for gimp
 

Also:

There is a newer version 0.4.3-2

so I would not even fool with the old one

Also:
 

I decided to check and version 0.4 is looking for GIMP 2.0


so if there is no newer binary package it's not likely you will have any
luck

Also:
 

On 10/22/2014 05:18 PM, philo wrote:
I decided to check and version 0.4 is looking for GIMP 2.0


so if there is no newer binary package it's not likely you will have any
luck

thanks for all the help, I'll look for gimp 2 and see if I can do that,
thanks very much again

--
Dale

Also:
 

On 10/22/2014 06:01 PM, Dale wrote:
On 10/22/2014 05:18 PM, philo wrote:
I decided to check and version 0.4 is looking for GIMP 2.0


so if there is no newer binary package it's not likely you will have any
luck

thanks for all the help, I'll look for gimp 2 and see if I can do that,
thanks very much again




I know nothing about GIMP 2.0 other than it's pretty old

You should really ask on the Ubuntu group there are folks there who know
considerably more than I do

Assuming you are using the 64bit version of Ubuntu an older version of
GIMP may not be possible to install unless you add the 32bit libraries.

From my search I see that the plug-in is for the 32 bit version anyway.

Looks like a lot of trouble.




I've never had the need to perform Fourier transforms but I'd give Image
Magic a try. Though they do have some Linux binaries avail I see none
for Ubuntu. It's possible the Windows version will run in WINE


If not you'd have to use Windows

fourier plug-in for gimp
 

On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote:

having troubling with make and make install of the fourier transform
plug-in for gimp

http://chidge.net/?m=stuff&o=howtos&p=fft

supposed to do forward and reverse

the make error I get is make: Nothing to be done for `all'.

if I (make install) after the make error, there is no error and it
creates a binary, but the filers don't show up under filters/generic
like the website above says

the binary is call fourier, if I try to run it I get the error bash:
./fourier: cannot execute binary file: Exec format error

there is something other things called --install-bin and gimptool-2.0,
but if I try to execute them, there are errors

do I have to move the binary somewhere?

I think I have all the libraries, there are no errors that libraries are
needed

I am using this version of Ubuntu Linux Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty

and GIMP 2.8.10


I'll be googling around in the mean time...

Have you tried he
http://gmic.sourceforge.net/gimp.shtml

Also:
 

On 10/22/2014 07:41 PM, philo wrote:
You should really ask on the Ubuntu group there are folks there who know
considerably more than I do

I asked on Ubuntu, someone suggested to run, make clean, first
then I had to run the command that "make install" put out

fourier-0.4.3$ cp fourier /home/dale/.gimp-2.8/plug-ins

it works but the background looks around 50%, if I enlarge it I can see
some of the image

the reverse works too

I'm working off these tutorials
http://www.cs.unm.edu/~brayer/vision/fourier.html
http://homepages.inf.ed.ac.uk/rbf/HIPR2/fourier.htm
http://people.via.ecp.fr/~remi/soft/...n.php3#fourier

the last link has a Yuv transform from RGB, it installed right the same
way, know it is an approximation depending on what RGB, good enough for
me, for now




--
Dale

fourier plug-in for gimp
 

On 10/22/2014 08:40 PM, ray carter wrote:
On Wed, 22 Oct 2014 16:44:33 -0400, Dale wrote:

having troubling with make and make install of the fourier transform
plug-in for gimp

http://chidge.net/?m=stuff&o=howtos&p=fft

supposed to do forward and reverse

the make error I get is make: Nothing to be done for `all'.

if I (make install) after the make error, there is no error and it
creates a binary, but the filers don't show up under filters/generic
like the website above says

the binary is call fourier, if I try to run it I get the error bash:
./fourier: cannot execute binary file: Exec format error

there is something other things called --install-bin and gimptool-2.0,
but if I try to execute them, there are errors

do I have to move the binary somewhere?

I think I have all the libraries, there are no errors that libraries are
needed

I am using this version of Ubuntu Linux Distributor ID: Ubuntu
Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty

and GIMP 2.8.10


I'll be googling around in the mean time...

Have you tried he
http://gmic.sourceforge.net/gimp.shtml


I asked on Ubuntu, someone suggested to run, make clean, first
then I had to run the command that "make install" put out

fourier-0.4.3$ cp fourier /home/dale/.gimp-2.8/plug-ins

it works but the background looks around 50%, if I enlarge it I can see
some of the image

the reverse works too

I'm working off these tutorials
http://www.cs.unm.edu/~brayer/vision/fourier.html
http://homepages.inf.ed.ac.uk/rbf/HIPR2/fourier.htm
http://people.via.ecp.fr/~remi/soft/...n.php3#fourier

the last link has a Yuv transform from RGB, it installed right the same
way, know it is an approximation depending on what RGB, good enough for
me, for now


--
Dale

Also:
 

On 10/22/2014 09:38 PM, Dale wrote:
On 10/22/2014 07:41 PM, philo wrote:
You should really ask on the Ubuntu group there are folks there who know
considerably more than I do

I asked on Ubuntu, someone suggested to run, make clean, first
then I had to run the command that "make install" put out

fourier-0.4.3$ cp fourier /home/dale/.gimp-2.8/plug-ins

it works but the background looks around 50%, if I enlarge it I can see
some of the image

the reverse works too

I'm working off these tutorials
http://www.cs.unm.edu/~brayer/vision/fourier.html
http://homepages.inf.ed.ac.uk/rbf/HIPR2/fourier.htm
http://people.via.ecp.fr/~remi/soft/...n.php3#fourier

the last link has a Yuv transform from RGB, it installed right the same
way, know it is an approximation depending on what RGB, good enough for
me, for now







There are a lot of sharp people on the Linux groups (a few bad trolls too)
I'm glad you got it at least partially working.

I don't know if any more development is being done on F.T. for GIMP


Brings back some memories though. Back in the 70's one of my friends
from engineering school ended up at GE and he was on the design team for
the FFT (Fast Fourier Transform) used in the early CAT scanners.